Pneumatic ceramic feed valve overview
JZ644TC Pneumatic Ceramics Feed Valve, JZ644TC-10C Pneumatic Ceramics Feed Valve, JZ644TC-10Q Ceramics Feed Valve, Pneumatic Feed Valve This valve is suitable for power plant dry ash system, warehouse pump discharge conveying, but also for mining, Paper, chemical and other types of wear and tear of dry dust, water, such as (ash water) and other media, in the pipeline for hoist purposes. Nominal pressure 1.0MPa, to adapt to the temperature ≤ 200 ℃, air pressure 0.6-0.8MPa. The valve is closed in any direction after all sealed. Body intermediate WCB cast steel or stainless steel castings. Sealing surface with a hard seal. The material mouth full flow unobstructed, wear resistance, sealing performance, aerodynamic load of small ash and ash phenomenon less. The valve is made of high-end ceramic structure has a tough seal, high mechanical strength, good wear resistance, long service life.
JZ644TC pneumatic ceramic valve main parameters
|
Brand: |
Shanghai workers |
model |
JZ644TC |
|
Connection Type |
Flange |
The main material |
Carbon steel |
|
Nominal diameter |
50-500 (mm) |
Suitable media |
Dry ash, cinder and other high wear media |
|
Material |
ceramics |
Sealed form |
Hard sealing type |
|
standard |
Various standards |
Drive mode |
pneumatic |
|
Stressful environment |
Atmospheric pressure |
Operating temperature |
Room temperature |
JZ644TC pneumatic ceramic feed valve features
The ceramic discharge valve is made of ceramic seal, erosion resistance, good wear resistance. Open double gate seal structure, opening and closing process gate spin, polishing self-cleaning function, the valve closed when the two-way seal, opening and closing flexible. According to different conditions can be set up purge port, automatic purge system for dry ash, slurry, materials and other media delivery, less fouling, no jam, simple maintenance, long service life.
